DTF Transfer- ST PATTY LOVE GNOME

This is a Ready to Press DTF(direct to film) Transfers, not an actual shirt. All transfers are at least 11 inches in width unless it states otherwise.

These are final sale.

DTF is the process in which designs are printed directly onto a film. The design is able to be applied to almost any substrate/material and can go on any color item.

Every Heat Press is different, temps and pressure are not always accurate or even so adjusting for your individual press is necessary, we highly recommend an infrared thermometer. WE ARE NOT RESPONSIBLE FOR ANY PRESSING ISSUES DUE TO INACCURATE TEMPERATURE OR PRESSURE.

Direct To Film Transfers

• High Pressure (8-9 manual) 60PSI Automatic
• Cold Peel
•  Temp: 320-325, Time: 10-15 sec
• Double Press With Parchment Paper For Best Results

We are not responsible for damaged transfers after you have pressed them. Please make sure you are knowledgable on your heat, pressing pressure and peeling technique. This includes using non-commercial grade heat presses or irons to try and use our transfers. 

We recommend using a heat gun to verify your heat temperature and the use a pressure test prior to pressing. 

Items should not be washed for at least 48 hours. Please allow the shirt to completely set with the item.

Due to the many variations in monitors and browsers, colors may appear different on different monitors. Computer monitors are not all calibrated equally and color reproduction on the Internet is not precise.

Recommended that all of pressed graphics are washed inside out on a cool cycle.

You can hang dry for longevity and to prevent any pulling that can occur during the dry cycle. You can use a no/low heat tumble dry but this can pull on the transfer with additional heat added to the print. 

HEAT CAN RUIN ANY TRANSFER AS HEAT IS THE WAY IT IS APPLIED. We recommend you do not wash any pressed garment for at least 48 hours to allow the print to fully cure to the material. 

The less heat that is used during wash will reduce the amount of wear that any graphic eventually will have and keep your graphics vibrant!

Our number one goal is to keep your garments looking like the day you bought them!

Failure to care for the garment with low/no heat can cause your print to fade or damage.